Why tracking decides everything else
Most Google Ads campaigns now use Smart Bidding, which sets a bid for each search based on how likely Google thinks it is to produce a conversion. Whatever you count as a conversion is what the system learns to find. If you count page views, it finds people who view pages.
So the most common complaint we hear, "Google says 40 conversions and we got 12 enquiries", is not a reporting quirk. It usually means the account is counting the wrong things, counting them twice, or both. And the bidding is being trained on that mistake every day.
Fix tracking before you touch budgets, keywords or ads. Everything else is judged on it.
What should count as a conversion
Write down what a lead is for your business, in one sentence, before you open the account. For most service businesses it is one of these:
- A submitted enquiry or quote form (the thank-you page loads, or the form's success event fires).
- A phone call from the ad or the website that lasts longer than a minimum you set, so wrong numbers and hang-ups are not counted.
- A booking made in an online calendar.
- Later, a qualified lead or a sale imported from your CRM (we cover this in our guide to offline conversion imports).
Things that should not be primary conversions for a lead generation account: page views, time on site, scroll depth, clicks on an email address, clicks on a social media icon, and visits to the contact page. They can be useful to observe. They are not leads.
Primary and secondary: the setting that decides what Google bids on
Google's help page on primary and secondary conversion actions explains the difference. Primary actions are reported in the Conversions column and used for bidding (when their goal is set to be used for bidding). Secondary actions are for observation only: they appear in the All conversions column and do not drive bidding, unless they are part of a custom goal.
That gives you a simple rule:
- Primary: the actions in your one-sentence definition of a lead.
- Secondary: everything else you want to watch, such as WhatsApp button clicks, brochure downloads or calls that were too short.
- Check custom goals. Google says actions in a custom goal are used for bidding whether they are marked primary or secondary.
Open Goals, then the conversions summary, and look at every action listed as primary. If you did not set one up on purpose, find out who did and why. Google itself warns that the wrong settings can stop Smart Bidding from optimising well.
Count one conversion per click
Google's page on conversion counting options offers two settings: Every, which counts every conversion after a click, and One, which counts only one per click. Google recommends Every for sales, because each sale adds value, and One for leads, because only one unique lead per click is likely to add value.
This setting alone explains many inflated reports. A person who submits the form, then calls, then submits again is one lead. With Every, that can look like three.
Forms
Forms cause the most double counting. Check each of these on your own site, with a test submission, while watching Google Tag Assistant or the tag's own diagnostics.
- The conversion fires once, on success, not when the button is clicked. A click on Submit with a missing field is not a lead.
- The thank-you page, if you use one, cannot be reached without submitting the form. If it is linked from the menu or indexed by Google, people land on it and count as leads.
- Only one tag fires. A Google Ads tag and a Google Analytics key event imported into Google Ads, both marked primary for the same form, count every lead twice.
- Embedded forms from a CRM or booking tool are tracked through that tool's own event or integration, because the tag on your page may not see inside the frame.
- Spam is filtered. Google's own best practices for high-quality leads suggest tools such as reCAPTCHA, double opt-in or server-side validation to make sure leads are genuine.
Calls
Calls are often the best leads a service business gets, and the easiest to miss. There are three separate places a call can start, and each needs its own setup.
- Calls from the ad itself, through a call asset or a call-only ad.
- Calls to the number on your website after someone clicked an ad. Google's help page on tracking calls to a phone number on a website describes Google forwarding numbers that replace your number on the site for ad visitors, at no cost to you, in eligible countries. A call counts when it lasts longer than a minimum length you choose.
- Taps on your number on a mobile website. This records the tap, not whether the call connected, so treat it as secondary if you can also track website calls properly.
Set a minimum call length that matches a real conversation for your business. A clinic booking can take two minutes; a quick question about opening hours takes twenty seconds. Then listen to a sample of recorded calls, if your phone system allows it and callers have been told, to check the threshold is right.
WhatsApp clicks
In the UAE and much of the Gulf, many enquiries arrive by WhatsApp, not by form. A click on a WhatsApp button can be tracked as an event, but a click is not a conversation. Plenty of people tap the button, see the chat open and never send a message.
Our approach: track the WhatsApp click as a secondary conversion, so you can see it without the bidding chasing it. Count the real WhatsApp leads in your CRM or inbox, and once you can match them back to the click, import them as an offline conversion. A pre-filled message from our WhatsApp link generator helps you tell which chats came from the ad.
Reconcile with your CRM every month
Google's count and your CRM's count will never match exactly. Some people clear cookies, some convert days later on another device, some calls go to voicemail. That is fine. What you are looking for is a gap that changes, or a gap that is far too big.
Once a month, take the last 30 days and fill in four numbers:
- Primary conversions in Google Ads, by conversion action.
- Leads in the CRM whose source is Google Ads (use UTM tags on every ad's final URL so this is possible; our UTM builder makes the tags).
- Of those CRM leads, how many were genuine (a real person, a real need, in your service area).
- Of the genuine ones, how many became customers.
A hypothetical example: Google reports 40 form conversions. The CRM has 18 Google leads. Of those, 12 are genuine and 3 become customers. The gap between 40 and 18 points to a counting problem (double tags, Every instead of One, or a reachable thank-you page). The gap between 18 and 12 points to spam or poor search terms. The gap between 12 and 3 is a sales and follow-up question, which our guide to speed to lead covers.
Common faults we find in audits
- Several primary actions for the same lead (a Google Ads tag, an imported Analytics event and a call from the site), so each lead counts two or three times.
- Counting set to Every on lead actions.
- Page views or contact page visits set as primary.
- A thank-you page that anyone can reach.
- Call tracking with no minimum length, or none at all.
- Tags that stopped firing after a website change, so the account has been bidding blind for weeks.
- No UTM tags, so nobody can tell which CRM leads came from Google.
- No consent mode on a site that advertises to Europe, so conversions from those visitors go unreported. Our guide to Google consent mode explains what to check.
Each of these can be checked in an afternoon. If you would rather have someone else do it, a Google Ads audit starts with tracking for exactly this reason. And once tracking is right, our guide to what Google Ads cost helps you set a budget on numbers you can trust.
Sources we checked
- Google Ads Help: About primary and secondary conversion actions (checked 24 October 2026)
- Google Ads Help: About conversion counting options (checked 24 October 2026)
- Google Ads Help: Set up tracking calls to a phone number on a website (checked 24 October 2026)
- Google Ads Help: Best practices for generating high-quality leads (checked 24 October 2026)
